Bounce houses need no introduction, you can hardly find anyone who does not love a fun-sized inflatable bouncer. And if the jumping house also includes a slide and a pool, it just takes the whole experience to another level.

But although it guarantees more fun, it also comes with an additional pair of safety guidelines and maintenance books. From setting up an inflatable bouncer to caring for it, ensuring all safety guidelines, and then properly deflating it, owning a bounce house comes with a lot of responsibilities.

In this guide, we have broken down every step of maintaining a bounce house so that you can embrace the fun without any worries on your hand. Here is everything you need to know about managing a bounce house.

How To Set Up a Bounce House
Trying to set up an inflatable water slide requires constant access to running water. Therefore, when building up your inflatable slide, choose a site with ample room and easy access to water. To avoid deterioration of the water slide's bottom and to collect dirt, put a sheet or canvas tarp underneath it.

Check the surface for a straight, smooth area that is free of any pebbles, sticks, pine needles, etc., before setting it up properly. This might be anything that could pierce the inflatable's bottom.

Check the vertical space for any overhead impediments like trees, electrical lines, or branches. And before continuing, ensure that the tarps are positioned beneath all inflatables.

The inflatable should then be unrolled facing the area you want it to. The blower should be connected to the "Port," which is the long airline or blower tube. Inflatables typically have "Ports" on the edges or in the far back.

Rotate the sheet clockwise and twist the knot around any extra "Ports" to secure them. To prevent the inflatable from bursting, let some air out.

Close any zippered or Velcro-sealed pockets after that. Connect thick extension cords to the power supply, then switch on the electricity. Check to make sure that only a tiny amount of air is exiting the outlets or vents when the inflatable is rising.

Additionally, keep in mind to inspect the air hose connecting to the blower to ensure it is not curled. Finally, anchor the inflatable by driving stakes into each of its four corners. Place pegs 45 degrees away from the bounce house, partly in.

How to Properly Care for your Bounce House

Before storing the swing set, make sure that it is totally dry. Since they weren't adequately dried out before being kept, bounce tents frequently deteriorate and develop mold or fungus. Leaving a bounce house operating outdoors for at least six hours is the simplest way to dry everything out.

You should get a towel and try to manually drain as much liquid from the inflatable jumpers as you can. With a towel, clean any flaps and joints. If your bounce house has any zippers, you should slightly open them to enable the humid air to escape.

There are specific weather circumstances where using the bounce house is not advised. A little shower and rain are acceptable, but much more than that can be hazardous. It's typically best to go indoors as soon as lightning appears.

In a bounce house, hazardous circumstances might also result from strong winds. No matter how securely the bounce house is anchored down, it is unsafe to jump inside if the wind speed surpasses 20 mph.

How to take down your Bounce House
After a fun-filled day of activity, taking down your bouncy house can be fairly difficult. An inflatable bouncer can often deflate completely in 10 to 20 minutes. The length of time will undoubtedly change depending on how big your inflatable bouncer is. Here are some suggestions to help you out.

First, look for any loose items that may have been left on the surface. Where necessary, dust or vacuum the area. then disconnect or shut off the blower.

Then let the air out and allow the bounce house to deflate by opening all Velcro or Jacket Flaps, Ventilators, and Outlets.

Popular Options For Bounce Houses with Slides
The llama water combo from Ginflatables is one bounce house that is sure to impress your kids. Not only is it a super fun bounce house, but it also houses a slide and a pool so that your kids can have a grand time in their inflatable bouncer.

And to add a cherry on top of that, it comes with a cute llama design attached at its side which is sure to catch the eyes of all kids!

And the best part? We haven't even gone to the features of this amazing bounce house yet. The llama water combo comes in a 28ftLx15ftWx17ftH size, allowing fun for multiple kids at the same time.

This bounce house has a large bouncing area, a climbing wall, a basketball hoop, a slide, and a pool. It has a zipper drain with a protective flap that can help you dry the water slide quickly.

Also sealed seams on water units to prevent water from getting into the interior. The anchors are all made of alloy materials, mold forming, not welding, and never rusting.

It also has a see-through window designed to make it easier for parents to supervise when playing. So can go easy on the safety supervision part as well. So hurry up and get your hands on this super cool llama water combo and give your kids a surprise they will cherish for years.

Conclusion
Bounce houses can be a fun experience for every kid. And to make it more memorable, the llama water combo is a great choice for parents looking to give their kids an all-in-one experience. No matter which inflatable water slide you choose, we hope our tips will come in handy to ensure a safe and fun playtime.